8 9
This restraint meets FAA Inversion
requirements for airplane use.
Airplane installation is the same
as vehicle installation.
Turn the top of the airplane
seat belt buckle away from the
restraint for easy release and
removal.
• Child restraints could be recalled for safety reasons.
You must register this restraint to be reached in a
recall. Send your name, address, the restraint’s
model number, and manufacturing date to
Evenflo Company, Inc.
1801 Commerce Dr.
Piqua, OH 45356
or call 1-800-233-5921.
You may also register on-line at:
https://plweb.evenflo.com/productreg.aspx
• For recall information call the U.S. Government’s
Vehicle Safety Hotline at 1-888-327-4236
(TTY:1-800-424-9153), or go to:
http://www.NHTSA.gov
Check with your
airline before departure
to make sure this child
restraint meets their
requirements.
Airplane Usage
Recall Information
For future reference, record the model number of your
child restraint AND the date of manufacture below.
Model Number:
Date of Manufacture:
“LATCH” (Lower Anchorage and Tether for Child
Restraints) is a system for attaching the child restraint
to your vehicle seat. It can be used in place of the seat
belts in vehicles with LATCH anchors. Refer to your
vehicle owner’s manual for the locations of LATCH
anchors. Note: Your vehicle owner’s manual may refer
to this system as ”ISOFIX.”
Air Bag Symbol – Alerts you to important
information about air bag safety.
LATCH Symbol – Alerts you to important
information about LATCH safety.
LATCH Information
Symbol Legend
• To clean pads slide the plastic clips on the seat pad
off of the seat shell.
• Cloth pads and canopies may be machine washed
separately – cold water, delicate cycle, tumble dry
10 – 15 minutes, low heat.
• Wipe straps, buckles and harness adjuster with warm
damp cloth and mild soap. Air dry.
• To help protect the vehicle upholstery, place a towel
beneath and behind the child restraint.
Care and Cleaning
To Next Page
Loading...
