46
Forward-facing Installation with
Vehicle Seat Belts
IMPORTANT:
• Before installing this child restraint forward-facing
with the vehicle seat belt, you MUST move the
Lower Anchor Connector (UAS) Assembly to the rear-
facing belt path so that it does not interfere with
the vehicle seat belt. Refer to pg. 27 for instructions on
moving the Lower Anchor Connector Assembly (UAS)
to the rear-facing belt path.
• Check your vehicle owner’s manual to determine how
to lock your seat belt for child restraint installation. If
vehicle permits, the retractor must be locked..
• ALWAYS use tether strap. Store tether strap when not
in use (pg. 71).
1. Reroute the lower anchor connector strap through
the rear-facing belt path (pg. 27). Store the lower
anchor connector (UAS) in the rear-facing belt path
as shown.
Forward-facing
lower anchor
(UAS) storage
To Next Page
Loading...
