Evenflo EveryFit - Removing the Tether Strap

General
71
• To avoid a strangulation hazard, you MUST tightly roll
or fold excess tether strap and secure with the strap/
rubber band.
• Attach the tether hook to one of the two storage clips
on the seat back when not in use (rear-facing mode
only). This will keep an unused tether or tether hook
from hitting someone during a crash.
1. Press the adjuster release button to loosen tether
strap.
2. Press the tab and twist, then remove the hook from
the anchor.
3. When the tether strap
is not in use you MUST
attach the hook to
the back of the child
restraint. A loose
tether strap and
hook may injure
your child.
To remove, see Step 2,
above.
Tab
Anchor
Push the
child restraint into
the vehicle seat back
while loosening the
adjuster
T
IP
!
T
IP
!
Removing the Tether Strap
Clip
WARNING!
DEATH or SERIOUS
INJURY can occur.