Evenflo EveryFit - Reattaching the Seat Cover

79
Reattaching the Seat Cover
1. Pull seat pad over seat
base and reconnect
snaps on front of seat at
both sides. Pull harness
adjust strap through
slot at front of seat pad,
and pull crotch buckle
through slot in seat.
NOTE: It is not necessary
to remove the cup
holders in order to
replace the seat pad.
2. Reconnect elastic straps
at back of seat and
insert tabs at sides of
seat into pockets on
either side of seat pad.
3. Place the back pad
around the upper seat
shell. Reconnect the
hook-and-loop fasteners
at lower opening of
back pad.
PLACE
AT
ARMPIT
PLACE
AT
ARMPIT
Snaps
Snaps
PLACE
AT
ARMPIT