21
2
Route LATCH harness and hook through LATCH
harness openings A.
A
WARNING
1
B
A
C
D
•ThecarrierMUST be locked firmly into the base.
Check by lifting up on the carrier.
• NEVER use this child restraint in the forward-facing
position.
Before you begin, be sure the
vehicle is on a level surface.
Place the base A on the vehicle seat
and check the level indicator B.
The base is level when only
green (no red) is showing in
the level indicator window B.
If the indicator is red,
adjust the level of the base
by pressing adjustment
button C and lowering
the adjustment foot D.
Note: The adjustment foot
has multiple levels.
A green
filled window means
go to Step 2.
Tip!
Tip!
IMPORTANT
Not all models are equipped with an adjustment foot. If
your model does not have one, use a rolled-up towel to
adjust base level (p. 26).
To Next Page
Loading...
