Evenheat RampMaster II User Manual

RampMaster II Operating Manual
RMII – Aug. 2015
Page 5 of 26
Use your Smart-phone to scan this QR code to watch RampMaster II how-to Programming Videos!
RampMaster II Key Layout
The RampMaster II key layout and key functions are designed to provide easy and uncomplicated use. Check out the RampMaster Key Descriptions on the
next page, along with a Key Function Table on page 19, for detailed key information.
Display - Large, bright LED display
can be seen from a distance. The
display terms are understandable.
START/STOP - Starts and stops
the actual firing.
ENTER PROG
- Begins the Ramp
Mode programming process.
RECALL
PROG –
Retrieves Ramp
Mode programs 1 thru 6.
DELAY - Allows you direct access
to the Delay Start feature.
ALARM
- Allows you direct
access to the alarm feature.
OTHER
- Menu area of the
RampMaster II for various set
-up
and configuration options.
CONE TABLE
- Allows you to look up
eq
uivalent temperatures used for cone
numbers.
F or °C - The RampMaster II can be set
to display in either Fahrenheit or Celsius.
RAMPMASTER II - Model RM2
The
RampMaster II is the original
multi
-segment ceramic control and
continues to set the standard.
13 Hr. – Slow Bisque – Used for Slow
Bisque Firing. Approximate firing time
is 13 hours.
10 Hr.
– Fast Bisque - Designed for
Fast Bisque Firing. Approximate
firing time is 10 hours.
7 Hr.
– Slow Glaze – Designed for
Slow Glaze Firing. Approximate firing
time is 7 hours.
4 Hr.
– Fast Glaze – Designed for Fast
Glaze Firing. Approximate firing time
is 4 hours.
VIEW SEGMENT
- Allows you to view current
running segment data.
REVIEW PROGRAM
- Used to review your
programmed firing data before committing to
the firing.

Evenheat RampMaster II Specifications

General

Brand	Evenheat
Model	RampMaster II
Category	Controller
Language	English