To Next PageTo Next Page
Need help?Do you have a question about the Evenheat Set-Pro and is the answer not in the manual?
Step-by-step guide for programming Metal Adventures BRONZclay, COPPRclay, and WHITE COPPRclay using Express Mode.
Step-by-step guide for programming Art Clay metal clay using the Express Mode.
Step-by-step guide for programming PMC metal clay using the Express Mode.
Step-by-step guide for programming Prometheus Clay metal clay using the Express Mode.
Step-by-step guide to creating and executing custom firing programs on the Set-Pro controller.
Visual layout and functional descriptions of the Set-Pro controller buttons and display.
Detailed instructions for programming Metal Clay Express Mode, covering various clay brands and settings.
Provides preset firing data for various metal clay brands used in the Express Mode.
Detailed explanation of how to create custom firing programs, defining segments, rates, and hold times.
Allows temporary adjustment of hold time and temperature during an active firing.
Features to bypass segments or view current firing status during a custom program.
Covers Set-Pro boot-up, idle state, and configuration of beginning/end process alarms.
Instructions for preset drying, program review, fine-tuning presets, and starting programs.
Details on storing, selecting, running, and stopping custom programs, plus program structure and arrow key usage.
Covers segments, data overwriting, temperature scales, max temperature, and delay start.
Describes various display states like Idle, Ramping, and Holding, and indicator dots.
A reference table for various messages displayed by the Set-Pro controller.
A table detailing the function of each Set-Pro controller button in different states.
Explanation of error codes displayed by the Set-Pro and their causes/solutions.
Troubleshooting steps for when the Set-Pro display shows no output.
Diagnosing and resolving issues where the kiln fails to stop its firing cycle.
Troubleshooting guide for kilns that fail to reach the programmed temperature.
Explanation and solution for the 'tC/Fail' error message indicating thermocouple issues.
Troubleshooting common causes for circuit breakers or fuses opening.
Common reasons for heating element and relay failures, including contamination and wear.
General| Brand | Evenheat |
|---|---|
| Model | Set-Pro |
| Category | Controller |
| Language | English |
