Everbilt HDS30 User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

THANK YOU

We appreciate t

he trust and confidence you have placed in Everbilt through the purchase of this sump pump. We strive to continually create quality

products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for

choosing Everbilt!

Item #1000 041 119

1000 041 120

Model #HDS30

HDS50

USE AND CARE GUIDE

SUMP PUMP

Questions, problems, missing parts? Before returning to the store,

call Everbilt Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

HOMEDEPOT.COM

1-844-883-1872

Questions and Answers:

T
timothy69Jul 28, 2025
How to troubleshoot Everbilt Water Pump that does not turn on?
- S
  Scott ValdezJul 28, 2025
  If your Everbilt Water Pump isn't turning on, start by ensuring it's properly plugged in. Then, check your circuit breaker to see if it has tripped or if a fuse is missing and replace the fuse or turn on the breaker if necessary. Also, make sure that the float is free of debris and obstructions. If these steps don't resolve the issue, the switch or the motor may be defective, requiring service by an authorized service center.
D
Dennis WolfAug 3, 2025
What to do if Everbilt Water Pump runs but does not discharge liquid?
- K
  Kevin OneillAug 3, 2025
  If your Everbilt Water Pump runs but doesn't discharge liquid, start by checking the check valve to ensure it's correctly installed with the flow indicating arrow pointing in the right direction. Also, the check valve might be stuck or plugged, so remove it and inspect it for proper operation. Another potential issue is that the lift might be too high for the pump's capacity, so check the rating table. Lastly, the inlet to the impeller could be plugged, requiring you to pull the pump and clean it. If the pump is air locked, shut the power off for approximately 1 minute and restart. Repeat several times to clear air from the pump.
M
Mr. Sean MiddletonAug 9, 2025
Why Everbilt Water Pump will not shut off?
- K
  Keith AlvarezAug 9, 2025
  If your Everbilt Water Pump won't shut off, there might be an obstruction in the float or float rod path, so check and clear any obstructions. Another potential cause is the pump being air locked; try shutting off the power for about a minute and then restarting it, repeating this several times. Also, if the liquid inflow matches the pump capacity, a larger pump might be necessary. If none of these solutions work, the switch might be defective, and you should have the pump serviced by an authorized service center.
M
Melanie FisherAug 15, 2025
What to do if Everbilt HDS30 does not deliver the rated capacity?
- S
  Sheila MejiaAug 15, 2025
  If your Everbilt Water Pump isn't delivering its rated capacity, first check the rated pump performance to ensure the lift isn't too high for the pump. Next, verify that the supply voltage corresponds to the voltage on the nameplate, as low voltage can slow the speed. Additionally, the impeller or discharge pipe could be clogged, so pull the pump and clean it, checking the pipe for scale or corrosion. Finally, if the impeller is worn due to abrasives, consider replacing it.
B
benderlindaAug 20, 2025
Why does my Everbilt HDS30 Water Pump continually cycle?
- M
  Monica LeeAug 20, 2025
  If your Everbilt Water Pump continually cycles, it might be due to the absence of a check valve in the long discharge pipe, which allows liquid to drain back into the sump. In this case, install a check valve in the discharge line. Alternatively, the existing check valve might be leaking, so inspect it for correct operation. Lastly, if the basin is too small for the inflow, consider installing a larger basin.

Everbilt HDS30 Specifications

General

Brand	Everbilt
Model	HDS30
Category	Water Pump
Language	English

Summary

Safety Information

Precautions

Danger and Warning Statements

Critical safety alerts regarding children, electrical hazards, and operating conditions.

Installation

Operation

Connecting power and testing pump operation

Operating the pump

Troubleshooting

Pump does not turn on

Possible causes and solutions for the pump not starting.

Pump will not shut off

Causes and solutions when the pump fails to stop operating.

Pump runs but does not discharge liquid

Troubleshooting steps for when the pump operates but doesn't move water.

Pump does not deliver rated capacity

Reasons and fixes for reduced pump performance.

Pump continually cycles

Diagnosing and resolving frequent pump on/off cycles.

Related product manuals

Preview: Everbilt HDPCP25

Everbilt HDPCP25

Preview: Everbilt PUP63-HD

Everbilt PUP63-HD

Preview: Everbilt HDEFR50W

Everbilt HDEFR50W

Preview: Everbilt ESE60W-HD

Everbilt ESE60W-HD

Everbilt EFLS10-HD

Everbilt EFLS15-HD

Everbilt EFLS20-HD

Preview: Everbilt EFLS15CI-HD

Everbilt EFLS15CI-HD

Preview: Everbilt UT08804

Everbilt UT08804

Preview: Everbilt EB-PUMP-T

Everbilt EB-PUMP-T

Preview: Everbilt AUTOJ100A2

Everbilt AUTOJ100A2