OPERATING INSTRUCTIONS
When the oven is first connected to the electrical supply, wait for the display automatically show " 12.30 ", a beep
sound once and the "12" and "." will flash. Ensure the correct time of the day is set before using the oven. please
note that is 24 hour clock, for example 2PM shown as 14.00.
To set the correct time of day:
1. Press " + " " - " button to adjust the hour setting.
2. Press " " to confirm the hour setting.
3. Press
"
+
" "
-
"
button to adjust the minute setting.
4.
Press " " to confirm the minute setting and
the timer will be in standby mode.
Note: If the display does not flash, adjust the time of day by pressing the " + " and " - " buttons at the
same time for more than 3 seconds.
Oven On and Off:
If the timer is in standby mode, press
" "
for more than 3 seconds, the timer will enter manual
mode and the
symbol
" " will light up continuously
.
1. Set the desired cooking function and the temperature degree.
2. Set the time function, then the oven will turn on
3. If you set Dur or End, after cooking, the oven will automatically turn off.
4. If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to
" 0 " position. Press " " and " + " buttons for more than 3 seconds to return to standby mode.
Time function setting:
In manual mode, pressing " " can enter the time function setting, the sequence of the function setting
is Manual mode - Minute minder-Dur-End-Manual mode. Then select the cooking function and adjust the
cook temperature if required.
Manual mode:
In manual mode, only the days’ time and the symbol " " lights up. The cooking duration has to be
controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours without any button being
pressed, the timer will flash once a second to warn you the oven will enter standby mode.
After a total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any
button to reset the timer if you intend to continue using
the oven, or press “ ” and “+” together for more than
3 seconds to enter standby mode if oven will not be used.
To Next Page
Loading...
