OPERATING INSTRUCTIONS
Audible warning time adjustment:
This function can be used to receive audible warning at the completion of the time period.
1. Press " “ button to select the minute minder function. The relevant " " and " . " symbol will flash.
2. Use" + " and “ - "button to adjust minute minder. (Refer to the instructions for setting the correct time of
day.)
3. Press " " button to confirm, the " " symbol will begin to light continuously. When the " " symbol
begins to light continuously, the audible warning time adjustment is done.
4. When the time is up, the timer gives an audible warning and the " " symbol begins to flash on the screen.
Press any button less than 3 seconds, it will stop the audible warning and the " " symbol disappears off the
screen.
Audible warning time adjustment is for warning purposes only.
Press " - " and "+ " together for more than 3 seconds to enter standby mode if oven will not be used.
Semi-automatic programming according to cooking period:
This function is used to cook in the desired time range. Place the food to be cooked into the oven. The oven is
adjustment to the desired cooking function and temperature.
The maximum setting of cooking period is 10 hours.
1. Press " " button until you see " Dur " on the timer screen. (Before setting cooking period.)
2. Use " + " and " - " button to adjust cooking period for the food you wish to cook. (Refer to the instructions for
setting the correct time of day)
3. Press " " button to confirm, the days’ time will appear on the screen and the symbols " A " and “ " will
light on the screen. While doing this the oven will also start to operate.
4. At the completion of the set duration, the timer will stop the oven and give an audible warning. Also, the
symbol " A " will begin to flash on the screen.
5. After bringing the cooking function and oven temperature knob to" 0 "position, press any button for less
than 3 seconds, it will stop the audible warning.
Pressing " " for more than 3 seconds sets the oven to Manual mode again to use the oven.
Semi-automatic programming according to finishing time:
This function is used to cook according to the desired finishing time. Place the food to be cooked into the oven. The
oven is adjusted to the desired cooking function and temperature degree.
1. Press " " button until you see " End " on the timer screen. (Before setting finished time).
2. Use " + " and " - " button to adjust finishing time. (Refer to the instructions for setting the correct time of
day)
3. Press " “ button to confirm, the days’ time will appear on the screen and the symbols "A" and " " will
light on the screen. While doing this, the oven will also start to operate.
4. At the completion of the set duration, the timer will stop the oven and give an audible warning. Also, the
symbol "A " will begin to flash on the screen.
5. After bringing the cooking function and oven temperature knob to " 0 " position, press any button for less
than 3 seconds, it will stop the audible warning.
Pressing “ " for more than 3 seconds sets the oven to Manual mode again to use the oven.
To Next Page
Loading...
