Everlast EV1100 - Page 13

12
Assembly Instructions
Assembly 2750mm Buttery Cable (37)
Note : Assemble pulley wheels as
you thread the cable. As you will
be unable to thread the cables
with the pulley wheels in situ.
a. Attach both ends of Cable (short)
(37) to left Buttery Arm (11) and
right Butterly Arm (12) fit two
Plastic Covers (53).
b. Install Pulley NO.10&12 (32) to
Single Pulley Block (14) using
two Hex Bolts (57), four Washers
(64) and two Nylock Nuts (67).
c. Install Pulley NO.11 (32) to
Reverse U (15) using one Hex
Bolt (57), two Washers (64) and
one Nylock Nut (67).
Pulley Assy #10 and #12
Pulley Assy #7 and #11
10 & 12
11
7
BUTTERFLY CABLE (37)
L = 2750 mm