Pulley Assy #7 and #11
Pulley Assy #8
Pulley Assy #6
Pulley Assy #5
11
7
8 6
5
LOWER CABLE (36), L = 3840 mm
13
Assembly Instructions
Assembly 3840mm Lower Cable (36)
a. With the Lower Cable (long) (36)
in groove of Pulley NO.6 (32)
thread cable through Support
Frames (8 and 4).
b. Install Lower Cable (long) (36)
to the Leg Extension Frame (6)
using one Hex Bolt (61), two
Washers (65) and one Nylock
Nut (68).
c. Install Pulley NO.6 (32) to
Support Frame (08) using one
Hex Bolt (57), two Washers (64)
and one Nylock Nut (67).
d. Install Pulley NO.7 (32) to
Reverse U (15) using one Hex
Bolt (57), two Washers (64) and
one Nylock Nut (67).
e. Install Pulley NO.8 (32) to Front
Base Frame (2) using one Hex
Bolt (57), two Washers (64) and
one Nylock Nut (67).
f. Install Pulley NO.9 (32) to Pulley
U (13) using one Hex Bolt (57),
two Washers (64) and one
Nylock Nut (67).
g. Attach the end of Cable (36) to
the Front Base Frame (2) using
one Hex Bolt (60), two Washers
(65), one Nylock Nut (68), the
Chain (42) and one Pothook
(20).
Note : Assemble pulley wheel as
you thread the cable. As you will
be unable to thread the cables
with the pulley wheel in situ.
To Next Page
Loading...
