Everlast EV500 - 2750 Mm Butterfly Cable

12
Assembly Instructions
Assembly 2750mm Buttery Cable (37)
Note : Assemble pulley wheel as
you thread the cable. As you will
be unable to thread the cables
with the pulley wheel in situ.
a. Attach both ends of Cable (short)
(37) to left Buttery Arm (11) and
right Buttery Arm (12) using two
Plastic Covers (53).
b. Install Pulley NO.10&12 (32) to
Single Pulley Block (14) using
two Hex Bolts (57), four Washers
(64) and two Nylock Nuts (67).
c. Install Pulley NO.11 (32) to
Reverse U (15) using one Hex
Bolt (57), two Washers (64) and
one Nylock Nut (67).
Pulley Assy #10 and #12
Pulley Assy #7 and #11
10 & 12
11
7
BUTTERFLY CABLE (37)
L = 2750 mm