To Next PageTo Next Page
Need help?Do you have a question about the Everlast PowerARC 161STH and is the answer not in the manual?
Essential safety guidelines for operating the welder and minimizing risks.
Information on HF waves generated by welding and their potential effects.
Detailed comparison of the welder's performance specifications and features.
Overview of the PowerARC 161STH welder, its purpose, and key features.
Detailed illustration and explanation of the welder's front control panel.
Illustration and explanation of the welder's rear connections and switches.
Guide on setting up the welder for stick welding operations.
Instructions for configuring the TIG torch with switch or foot pedal.
Detailed steps for connecting the shielding gas supply to the welder.
Information on how to properly connect the power source wiring.
Techniques for starting the arc when performing stick welding.
Comprehensive guide to performing TIG welding with the unit.
Instructions on how to properly prepare tungsten electrodes for TIG welding.
Details on the included accessories and components in the welder package.
Detailed breakdown and identification of TIG torch parts.
Common issues, their possible causes, and solutions for the welder.
Explains error codes, their meanings, and potential causes.
Pinout and compatibility information for the foot pedal connector.
Step-by-step instructions for adjusting the HF point gap.
General| Input Frequency | 50/60Hz |
|---|---|
| Output Current Range | 10-160A |
| Power Efficiency | 85% |
| Duty Cycle | 60% @ 160A |
| Welding Processes | Stick (SMAW), TIG (GTAW) |
| Protection Features | Overload protection, Thermal protection |
| Input Voltage | 120/240 VAC |
