27
ABF 05-10-15
ENGLISH
1.2 TESTING AND GUARANTEE
The appliance is tested in our works in compliance with established regulations and then shipped ready for use.
Only special models Spm require additional testing at the place of installation, because these units require a series of connections to
be made by a qualified installer (see headings 3.2 and 3.3).
The guarantee is valid for a full 12 months from the date of delivery of the appliance and it covers the repair or replacement of any
defective parts, with the exception of electrical and electronic components.
Manifest defects or differences with respect to the client’s order must be communicated to the manufacturer within five days from the
receipt of the goods or they will not be covered by the guarantee terms.
Any hidden or other defects must be communicated to the manufacturer within five days from the time that they are discovered and,
in any event, within the maximum guarantee term of six months. The purchaser shall be entitled only to request repair or replacement
of the goods. The purchaser is not entitled to claim compensation for direct or indirect damages of any whatsoever nature. In any
event, the entitlement to repair or replacement of the materials must be exercised within the maximum term of the guarantee, which
is contractually stipulated to cover a shorter period than the maximum term established by law.
Repairs or replacement of defective materials will be carried out at the manufacturer’s works; material returned to the manufacturer
must be shipped carriage paid and will be returned to the purchaser carriage forward.
1.3 INTRODUCTION
This manual has been prepared with the scope of supplying all the instructions required for the correct use of the appliance and to
maintain it in optimal condition. It also contains important user safety information.
The following professional roles are explained in order to define the responsibilities of each:
Installer: a qualified technician who positions the appliance and places it in service it in accordance with the instructions in this
manual.
User: the person who, after having read this manual carefully, operates the appliance in accordance with the intended use specified
in this manual.
Users’ responsibilities:
- to ensure that food products are conserved at suitable temperatures and not exceeding the permitted period of time
- to be aware of the regulations governing the conservation of food and to observe any whatsoever hygiene indications
that may be applicable.
The user is obliged to read the manual attentively and refer to the information in the manual at all times.
Particular attention must be paid to the contents of heading 1.5 General safety warnings.
Routine maintenance technician: qualified technician able to perform routine maintenance of the appliance by following the instructions
in this manual (see section 6).
Special maintenance technician: qualified technician, authorized by the manufacturer to perform extraordinary maintenance of the
appliance (see section 7).
The symbol
appears at certain points in the manual to draw the reader’s attention to important safety information.
The manufacturer declines any whatsoever responsibility in the case of improper use of the appliance deviating from the reasonably
construed intended use, and for all operations carried out that are not in compliance with the instructions laid down in the manual.
This manual must be conserved in a place that is accessible and known to all operators (installer, user, routine maintenance technician,
special maintenance technician).
This manual must not be reproduced or divulged, in whole or in part, using any whatsoever means or in any whatsoever form.
1.4 PRODUCT DESCRIPTION
The appliance comprises a modular single body with panelling in various materials and insulation in expanded polyurethane foam,
density 42 kg/m
3
.
The appliance instruments are located on the front panel which closes the front of the motor unit, inside which the condenser unit and
electrical wiring can be housed.
The refrigerator interior is fitted with suitable supports for wire shelves (grids) or trays and Gastronorm containers.
The doors are fitted with an automatic return device and magnetic seal elements.
During the design and construction stage all measures have been adopted to implement total safety including radiused interior
corners, funnel-shaped base panel to convey condensate to exterior, no rough surfaces, fixed guards protecting moving or potentially
dangerous parts.
1) The available models are descripted in table 1.
To Next Page
Loading...
