40
ABF 05-10-15
ENGLISH
PROGRAM MEMORIZATION
Select a Blast/Freezing cycle in modality “Time or Temperature “
Press fore five seconds the Key PROGRAMS
The display DIS1 shows up “P” follow up of the number of the first free program, with Keys more
or less
(increase or decrease) is possible choose the number of the program you wish memorized.
To memorize the cycle chosen press the key Program
for five seconds.
If selected programs already written, will be cancel and memorized once again.
Are available 99 programs.
PROGRAM SELECTION
To select a memorized program, pres key Program
, the display DIS1 will show up “P1,
with keys more or less
(increase and decrease) select the program chosen.
Press key START/STOP
to the start on.
During the performance is possible see the number of the program if pressed key PROGRAMS
.
The memorized programs are actually normal cycles of Blast/freezing.
CYCLE POINT PERFORMANCE
After the selection of a cycle, press the key START/STOP
to visualize.
The formalities of execution of the cycles are brought in the following paragraphs.
Blast Positive Cycle
The display DIS1 shows up the core probe temperature in case of temperature cycles, or the temperature of the probe
cold room in cycles in modality “time”.
The display DIS2 visualizes the time in decrement in both kinds, temperature or time cycles.
The time used for the temperature cycles is determinate by the value of the parameter.
For the temperature cycles the decrement of the time begins only if the temperature of the core probe is below the value.
The blast led on
Press the key less
to visualized on the display DIS2 the performance time pass from the beginning of blast
phase.
During a temperature cycle is possible to visualize the temperature of the probe cold room, pressing the key Blast the
visualization remains on the displays for five seconds.
During a cycle “ time” is possible to visualize the temperature of the core probe pressing the key probe
.
The visualization remains on the displays for five seconds.
To Next Page
Loading...
