41
ENGINE OPERATION
6
■
Proper Trim Angle
The trim angle is optimum when the
boat is parallel to the water surface
while running.
P model
TP model
R, TE type
①
Stop the engine.
②
Shift the outboard into neutral.
③
Raise the engine to the tilt up posi-
tion.
④
Change the thrust rod position.
⑤
Gentry lower the outboard.
E type
①
Stop the engine.
②
Shift the outboard into forward.
③
Raise the engine to the tilt release
position(b).
④
Change the preset knob position.
⑤
Gently lower the outboard.
Thrust Rod
Higher
Lower
Preset Knob
OM_E_10HP_body_111213.indd 41 11/12/13 13:23
To Next Page
Loading...
