43
ENGINE OPERATION
6
②
Lock the tilt with the Tilt stopper
after the outboard motor has been
tilted up.
③
Manual tilting
If the battery is dead, and the Pow-
er Tilt Switch inoperative, turn the
manual valve to counter-clockwise.
This will allow manual tilting of the
outboard motor.
Note
Stop the engine before adjusting trim
angle.
!
Excessive trim up or down may lead
to unstable boat operation, potentially
causing the steering difficulty that
leads to accident during cruising.
●
Do not cruise at high speed if im-
proper trim position is suspected.
Stop the boat and readjust trim
angle before continuing cruise.
●
For outboard motor model with PTT
switch on the bottom cowl, do not
operate the switch during cruising,
or control of boat may be lost.
Tilt Stopper
MANUAL
POWER
OM_E_10HP_body_111213.indd 43 11/12/13 13:23
To Next Page
Loading...
