Evo SP8 - Page 31

EVO EXPANDED SYSTEM
Connect the Optical Outputs of the EVO 16 to the Optical Inputs of
the EVO SP8 using two TOSlink cables.
Connect the Optical Inputs of the EVO 16 to the Optical Outputs on
SP8 using two further TOSlink cables.
Connect the Word Clock Output of the EVO 16 to the Word Clock Input
of the SP8.
In the setup menu of the EVO SP8, ensure that your clock source is set
to ‘Word Clock’ and the Word Clock Termination is turned on. Also set
the Sample Rate to ‘Auto’.
On the EVO 16, ensure that its clock source is set to ‘Internal’ and the
Optical format is set to ‘ADAT’ in the EVO Mixer Application’s System
Panel.
1.
2.
3.
4.
5.