Need help?Do you have a question about the Evo SP8 and is the answer not in the manual?
Steps to register the EVO SP8 on the Audient ARC platform for software benefits.
Details on the eight combi-jack inputs for microphones and line-level devices.
Manual gain adjustment, channel mute, phantom power, and instrument mode settings.
How to use the automatic gain setting feature for multiple channels.
Explanation of the eight line outputs and ADAT optical inputs/outputs.
How to check input levels and access the device's settings menu.
Instructions for powering the unit on and off, including standby mode.
Configuration of clock source, sample rate, ADAT channels, and word clock synchronization.
Setting the signal for line outputs and adjusting front panel LED brightness.
Understanding status indicators and performing a factory reset.
Detailed guide on primary and replica clock device setup.
Connecting one SP8 and one EVO 16 for expanded functionality.
Connecting two SP8s and one EVO 16 for maximum expansion.
Using the SP8 as the master clock when connecting to an ADAT interface.
Using the SP8 as a slave clock when the host interface is the master.
Configuring two SP8 units as slave clocks to a master device.
To Next Page
General