Evolution R185 SMS - Machine Specifications; Cutting Capacities and Angles; Blade, Laser, and Noise Data

UK / EU
MACHINE
R185SMS R185SMS+
Product Code
047-0001, 047-0002,
047-0003
047-0001A, 047-0002A
047-0003A
Motor (220-240V ~ 50 Hz) 1000W 1200W
Motor (110V ~ 50 Hz) 1000W 1200W
Motor (120V ~ 60 Hz)
Speed No Load 3700 min
-1
3700 min
-1
Weight (Net) 8.8kg 8.95kg
Dust Port Diameter 36mm 36mm
Tool Dimensions (H x W x L) (0° / 0°)
(Note: Dimensions taken with saw head down.)
290 x 595 x 565mm 290 x 595 x 565mm
Cable Length 2m 3m
CUTTING CAPACITIES
Mild Steel Plate - Max Thickness 3mm 6mm
Mild Steel Box Section - Max Wall Thickness
(50mm mild steel box section.)
3mm 3mm
Wood – Max section 210 x 56mm 210 x 56mm
Minimum size work-piece
(Note: Any work-piece smaller than the recommended minimum
work-piece requires additional support before cutting.)
L:125 x W:30 x D:3mm
MAXIMUM CUTTING ANGLES
Mitre 50˚ - 50˚ 50˚ - 50˚
Bevel 0˚ - 45˚ 0˚ - 45˚
MITRE BEVEL
0° 0° 210mm x 56mm 210mm x 56mm
0° 45° 210mm x 38mm 210mm x 38mm
45° 0° 145mm x 56mm 145mm x 56mm
45° 45° 145mm x 38mm 145mm x 38mm
BLADE DIMENSIONS
Diameter 185mm 185mm
Bore 20mm 20mm
Thickness 1.7mm 1.7mm
No. of Teeth 16 20
LASER
Laser Class - Class 2
Laser Source - Laser Diode
Laser Output Power (Max) - ≤1mW
Wave Length (Nm) - 650
NOISE EMISSION DATA*
Sound Pressure L
P
A (No-Load) 220-240V: 93,1 dB(A) 110v: 91,9 dB(A)
Sound Power Level L
W
A (No-Load) 220-240V: 106,1 dB(A) 110v: 104,9 dB(A)
Uncertainty, K
pA
& K
WA
3 dB(A)
MACHINE SPECIFICATIONS
4
www.evolutionpowertools.com