Evolution R185 SMS - Safety Information; Safety Labels and Symbols

*Noise emission test according to
EN 62841-1 & EN 62841-3-9.
WARNING: The noise emissions during actual
use of the power tool can differ from the
declared values depending on the ways in
which the tool is used especially what kind of
workpiece is processed.
WARNING: The need to identify safety
measures to protect the operator that are
based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
Polarized Plugs
To reduce the risk of electric shock, this
equipment has a polarized plug (one blade
is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the
plug in any way.
(1.8) SAFETY LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools
for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
min
-1
(RPM)
Speed
~
Alternating Current
n
o
No Load Speed
Wear Safety Goggles
US
R185SMS R185SMS+
047-0004A 047-0004
8.3A 10A
3700 RPM 3700 RPM
19.6 lbs 19.7 lbs
1-27/64” 1-27/64”
11-3/8 x 23-1/2 x 22-1/4” 11-3/8 x 23-1/2 x 22-1/4”
6 ft 10 ft
1/8” 1/4”
1/8” 1/4”
8-1/4” x 2-1/4” 8-1/4” x 2-1/4”
L: 4-7/8” x W: 1-3/16” x D: 1/8”
50˚ - 50˚ 50˚ - 50˚
0˚ - 45˚ 0˚ - 45˚
8-1/4” x 2-1/4” 8-1/4” x 2-1/4”
8-1/4” x 1-1/2” 8-1/4” x 1-1/2”
5-3/4” x 2-1/4” 5-3/4” x 2-1/4”
5-3/4” x 1-1/2” 5-3/4” x 1-1/2”
7-1/4” 7-1/4”
25/32” 25/32”
1.7mm 1.7mm
16 20
- Class 2
- Laser Diode
- ≤1mW
- 650
91,9 dB(A)
104,9 dB(A)
3 dB(A)
5
www.evolutionpowertools.com
DE
EN
ES
PL
PT
RO
FR