◦ If you are upgrading a Xeebra server, please wait for 2-3 minutes and open the Services
Management tool: http://127.0.0.1:9081 to check if everything is ok on the Health page
(green or at least orange status for the resolv.conf check) before starting to use Xeebra.
◦ If you are upgrading a Xeebra Client, the Services Management page is not present, so please
just wait for 30 seconds to be sure everything has started before beginning to use Xeebra.
INSTALLATION AND CONFIGURATION MANUAL
Xeebra |3. Installation| 7
To Next Page
Loading...
Need help?
General
