5. Click START.
You are prompted to select the appropriate write mode.
If this dialog box does not appear, then you should copy the .iso file on your local machine.
Also, if you are using a laptop with a docking station, please ensure not to plug the USB key
into the docking station. Use a USB port on the laptop instead.
6. Select the option Write in DD Image mode and click OK.
You will be notified that all data already on the USB drive will be overwritten.
7. Click OK to continue.
Wait until the ISOfile has been completely written to the USBkey.
INSTALLATION AND CONFIGURATION MANUAL
Xeebra |3. Installation| 9
To Next Page
Loading...
Need help?
General
