Excell 150S User Manual

8
040112XX
ZSME400000005
EXCELL PRECISION CO., LTD
Function
Operation
Display
Description
Check weighing setpoint
parameter setting
Press the key to set
the parameter of FUNC.4 to 1 in
the normal mode
.
or
.
See 4-2 for details
 Key actions in function set up mode
 Increases the number of the flashing digit
 Decreases the number of the flashing digit
 Moves the flashing digit one space to the left
 Moves the flashing digit one space to the right
 Saves the configuration
 Quits set up mode / Escape
2-2 Error Messages (Display in General Function setting)
.  Load Cell output voltage  - 0.1m V / V or  4mV / V
.  Weight value  previous weight value
.  Actual measured weight value  previous weight value
.  Setting value 0
.  mV / V value entered  measuring range
.  mV / V value entered is too small (SPAN – Zero  0 mV / V)
.  Displayed resolution is less than 0.12 V / division

Excell 150S Specifications

General

Brand	Excell
Model	150S
Category	Controller
Language	English