EXCELL PRECISION CO., LTD.
Chapter 2 General Operation Description
2-1 Backlight Function
Press key to select the display backlight mode:
. “Auto Backlight” mode. When the weight is over 10d or any key is
pressed, the display backlight will be switched on. When the
weight returns to zero (the weight on platform is less than 10d),
the display backlight will switch off after 10 seconds.
. Display backlight is on all the time.
. Display backlight is off.
2-2 Weighing Mode
2-2-1 Units Selection
1. After indicator is turned on, use key to select a unit from kg, lb, tael or
viss, as the screen indicated.
2. The selected unit will be memorized when you turn the indicator off. And the
memorized unit will appear after you turn on the indicator next time.
2-2-2 Check Weighing Mode
1. Preset “ High limit”, “Low limit” and “ Beeper value” operation
Use and key to preset values.
For example:
Preset “Low limit” ( Low limit 10d ) e.g. Low limit = 20 kg
Press key the display shows .
Press key 1 time the display shows .
Press key 2 times the display shows .
Press key 4 times the display shows .
Preset “High limit” ( High limit Low limit ) e.g. High limit = 25 kg
Press key 1 time the display shows .
Press key 1 time the display shows .
Press key 2 times the display shows .
Press key 1 time the display shows .
Press key 5 times the display shows .
Press key 3 times the display shows .
To Next Page
Loading...
Need help?
General
