Exerpeutic 1020 - Step 3: Connecting Console Wires; Step 4: Leveling the Treadmill

11
Step 3
Connect the Sensor Cable II (30), Hand Pulse Sensor and Speed Button Wires (62), and
Hand Pulse Sensor and Mode / On Off Button Wires (63) to the wires that come from the
Computer (70).
Tuck wires into the Handlebar (68).
Attach the Computer (70) onto the Handlebar (68) with two Computer Knobs (69).
Place the Safety Tether Key (71) onto the Computer (70).
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Step 4
There are five Adjustable Levelers (28) on the bottom of both Stabilizer Tubes (31) and
Stabilizer (57). Turn the Adjustable Leveler (28) as needed to level the treadmill.
28
28
57
31
28
71
70
62
69
68
30
63
69
2 Computer Knobs
(M5xØ25x55)