EasyManuals Logo

Exmark LAZER Z CT Operator And Parts Manual

Exmark LAZER Z CT
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
- 3 -
1.4.2 A Rollover Protection System (roll bar) is installed on the unit.
WARNING
POTENTIAL HAZARD
There is no rollover protection when the roll bar is down.
WHAT CAN HAPPEN
Wheels dropping over edges, ditches, steep banks, or
water can cause rollovers, which may result in serious
injury, death or drowning.
HOW TO AVOID THE HAZARD
Keep the roll bar in the raised and locked position and use
seat belt.
Lower the roll bar only when absolutely necessary.
Do not wear seat belt when the roll bar is down.
Drive slowly and carefully.
Raise the roll bar as soon as clearance permits.
Be certain that the seat belt can be released quickly if the machine is driven or
rolls into ponds of water.
Check carefully for overhead clearances (i.e. branches, doorways, and
electrical wires) before driving under any objects and do not contact them.
1.4.3 Stop engine and wait for all moving parts to stop. Remove key and engage park
brake whenever leaving the mower.
2. SPECIFICATIONS
2.1 MODEL NUMBER
: LCTSB
2.2 DIMENSIONS
2.2.1 Overall Unit Width with Snow Blade: 56”
2.2.2 Overall Unit Length with Snow Blade: 95.6”
2.2.3 Weight: 140 lbs (64 kg) (Snow Blade Assembly)

Other manuals for Exmark LAZER Z CT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Exmark LAZER Z CT and is the answer not in the manual?

Exmark LAZER Z CT Specifications

General IconGeneral
BrandExmark
ModelLAZER Z CT
CategoryLawn Mower
LanguageEnglish

Related product manuals