Exmark LAZER Z E Series User Manual

Safety
126-0768
RearDischargeUnitsOnly
126-2055
1.Wheellugnuttorque95ft-lb(129N-m)(4x)
2.Wheelhubnuttorque235ft-lb(319N-m)
3.ReadandunderstandtheOperator’smanualbefore
performinganymaintenance,checktorqueafterrst
100hoursthenevery500hoursthereafter.
126-4108
EFIRedEquippedUnitsOnly
1.Engineoiltemperature
5.Throttle-efcientsetting;
enginerotationalspeed
standardidlespeed-fuel
economy
2.Engineoilpressure6.Throttle-maximum
setting;enginerotational
speedhighidlespeed
3.Engine
failure/malfunction
7.PTOwithclutchsaver;
readtheOperator’s
manual
4.Throttle-lowsetting;
enginerotationalspeed
lowidlespeed
15

Exmark LAZER Z E Series Specifications

General

Engine Brand	Kawasaki
Transmission	Hydro-Drive
Deck Construction	Fabricated
Deck Material	10-gauge steel
Turning Radius	Zero
Cutting Width	52, 60, 72 inches
Category	Commercial
Type	Zero-Turn
Engine Type	4-cycle, V-Twin
Engine Options	Kawasaki
Speed	Up to 10 mph forward, 5 mph reverse
Warranty	5-year limited
Horsepower	23.5 - 27
Cutting Height	1.0 - 5.0 inches in 0.25 inch increments