Exmark LAZER Z E Series User Manual

Specications
FrontCaster
Semi-Pneumatic
DeckSize
“00”
Models
“A2”
Models
“A1”
Models
Quantity
222
Tread
SmoothSmoothSmooth
Size(60&
72Decks)
13x6.50-613x6.50-6
Size(48&
52Deck)
13x5.00-613x5.00-6
E-Series:
Drive
Pneumatic(Airlled)
DeckSize
48&5260&72
Quantity
22
Tread
SuperTurfSuperTurf
Size23x9.50-1224x12.00-12
PlyRating
44
Pressure
13psi(90kPa)13psi(90kPa)
FrontCaster
Semi-PneumaticPneumatic
(Airlled)
DeckSize
“A1”and
“B1”
Models
“A2”“B2”,
and“00”
Models
“A3”
Models
Quantity
222
Tread
SmoothSmoothSmooth
Size13x6.50-613x5.00-613x6.50-12
PlyRating
4
Pressure
13psi
(90kPa)
CuttingDeck
•CuttingWidth:
–48inchDeck:(121.9cm)
–52inchDeck:(132.1cm)
–60inchDeck:(152.4cm)
–72inchDeck:(182.9cm)
•Discharge:
–SideDischarge:Non“R”models
–RearDischarge:“R”models
•BladeSize:(3ea.)
–48inchDeck:16.25inches(41.3cm)
–52inchDeck:18.00inches(45.7cm)
–60inchDeck:20.50inches(52.1cm)
–72inchDeck:24.50inches(62.2cm)
•BladeSpindles:
–X-Series:Solidsteelspindleswith1.18inch
(30mm)I.D.bearings.
–SandE-Series:Solidsteelspindleswith.984
inch(25mm)I.D.bearings.
•DeckDrive:
Electricclutch:
–48and52inch,60R,72RDecks:“B”Section
beltwithself-tensioningidler.
–60and72inchDecks:5VSectionbeltwith
self-tensioningidler.
•Deck:
–SideDischarge:Fulloatingdeckisattached
toout-frontsupportframe.Anti-scalprollers
providemaximumturfprotection.Deck
designallowsforbagging,mulchingorside
discharge.
–RearDischarge:Fulloatingdeckisattached
toout-frontsupportframe.Anti-scalprollers
andsidebumpersprovidemaximumturf
protection.Deckdesignallowsforrear
dischargeornishcut(reduceddischarge).
◊48inchDeck:3anti-scalprollers
◊52inchDeck:3anti-scalprollers
◊60inchDeck:4anti-scalprollers
◊72inchDeck:6anti-scalprollers
◊60inchDeck-RearDischarge:
4anti-scalprollers
◊72inchDeck-RearDischarge:
4anti-scalprollers
•DeckDepth—AllDeckSeries:5.5inches(14cm)
•CuttingHeightAdjustment:
Footactivatedleverisusedtoadjustthecutting
heightfrom1inch(2.5cm)to51/2inches(14
cm)in1/4inch(6.4mm)increments.
•MulchingKit:Optional.
22

Exmark LAZER Z E Series Specifications

General

Engine Brand	Kawasaki
Transmission	Hydro-Drive
Deck Construction	Fabricated
Deck Material	10-gauge steel
Turning Radius	Zero
Cutting Width	52, 60, 72 inches
Category	Commercial
Type	Zero-Turn
Engine Type	4-cycle, V-Twin
Engine Options	Kawasaki
Speed	Up to 10 mph forward, 5 mph reverse
Warranty	5-year limited
Horsepower	23.5 - 27
Cutting Height	1.0 - 5.0 inches in 0.25 inch increments