EasyManuals Logo

Exmark Turf tracer User Manual

Exmark Turf tracer
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
- 17 -
Securely fasten the machine to the trailer with straps, chains, cables, or ropes.
Do not rely solely on the parking brake to hold the machine on the trailer.
Be sure that the trailer has all necessary lighting and marking as required by law
and use a safety chain.
4. MAINTENANCE & ADJUSTMENTS
WARNING
POTENTIAL HAZARD
While maintenance or adjustments are being made,
someone could start the engine.
WHAT CAN HAPPEN
Accidental starting of the engine could seriously injure
you or other bystanders.
HOW TO AVOID THE HAZARD
Remove the key from the ignition switch and pull the
wire(s) off the spark plug(s) before you do any
maintenance. Also push the wire(s) aside so it does
not accidentally contact the spark plug(s).
WARNING
POTENTIAL HAZARD
The engine can become very hot.
WHAT CAN HAPPEN
Touching a hot engine can cause severe burns.
HOW TO AVOID THE HAZARD
Allow the engine to cool completely before service or
making repairs around the engine area.
4.1 PERIODIC MAINTENANCE
4.1.1 Check engine oil level
.
Service Interval: See Engine Owner's Manual
a) Stop engine, wait for all moving parts to stop and make sure unit is on a
level surface.
b) Check with engine cool.
c) Clean area around dipstick. Remove dipstick and wipe oil off. Reinsert the
dipstick. DO NOT screw into place. Remove dipstick and check oil level.
d) If the oil level is low, add oil as specified in the Engine Owner’s Manual to bring
the oil level up to the “FULL” mark on the dipstick. DO NOT OVERFILL.
IMPORTANT: DO NOT operate the engine with oil level below the “LOW”
(or “ADD”) mark or over the “FULL” mark.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Exmark Turf tracer and is the answer not in the manual?

Exmark Turf tracer Specifications

General IconGeneral
Engine TypeGasoline
Deck TypeFabricated
Engine BrandKohler
Deck Width48 inches
Cutting Width48 inches
EngineKohler
Turning RadiusZero
Drive SystemHydro Drive
TransmissionHydrostatic

Related product manuals