15
CLEaNINg aND CaRE
Cleaning the Brewing group and portalter
Unlock and remove the portalter from the group head.
Place the cleaning membrane in the lter basket.
Fill the lter basket with professional cleaning powder for espresso coee machines.
Lock the portalter into the group head.
Acvate the auto-cleaning program by turning o the machine at the main switch. Then press and hold down the
2 Short Espressos buon
on the control panel of the group requiring cleaning. Without releasing the buon, turn
the machine back on. Auto-cleaning will start automacally. Release the buon.
Blind gasket
Espresso machine
cleaning powder
Note:
Only use professional cleaning
powder designed specically
for espresso machines. It’s
available from the distributor.
Part no: 1104162
i
i
WARNING!
Never try to open the portalter while the machine is in operaon! The pressurised hot water
could cause scalding or serious injury. Aer cleaning has nished, wait about 3 seconds before
removing the portalter.
Important:
When the cleaning process is nished, remove the portalter and run water through the group
again to rinse out any residue. Repeat the cleaning process this me without cleaning powder to
remove any remaining residue. Store the blind gasket in a convenient locaon for future use.
Note:
Rinse the group and portalter with hot water (using only the blind gasket and hot water,
no cleaning powder) each day.
Clean the group and portalter with cleaning powder once a week.