33
Megacrem
Auto On/Off
Counters
PROGRAMMING USING THE DISPLAY
Note:
By default, this setting is set as: On: - - : - - (indicating that the function is disabled).
Changing the value to anything other than - - : - - enables the function. To leave this function
disabled, press the 2 Short Espressos button while the value selected is - - : - -.
Note:
By default, this setting is set as: On: --------- (indicating that the function is disabled).
Changing the value to anything other than --------- enables the function. To leave this function
disabled, press the 2 Short Espressos button while the value selected is ---------.
g. 12
Counters
After accepting the changes made in the “set clock” menu, pressing the 2
Short Espressos button accesses the coffee machine’s auto on/off
programming menu (see fig. 09).
To change the auto on/off time, increase/decrease the values (hours) using
the 1 Short Espresso and 1 Long Espresso buttons while the
values are flashing. When the desired value is reached, press the 2 Short
Espressos button to accept it. Set the values for the minutes in the
same way( , and ).
g. 9
Auto On/Off
On: hh.mm
g. 10
g. 11
Closed On
Day
Auto On/Off
Off: hh.mm
To access the counters menu, go to the start of the second menu level
(see page 32, fig. 07).
Briefly press the Continuous Dispensing button to display the
“counters” option (see fig. 12).
The machine has 4 counters:
Litres: volume of water dispensed by the machine (indicator used for
descaling maintenance cycles).
Service: number of coffees dispensed (indicator used for servicing).
Number of coffees/infusions dispensed.
Number of coffees dispensed per button.
While the auto off time is flashing, increase/decrease the values by
pressing the 1 short espresso and 1 Long Espresso buttons.
When the desired value is
Reached, press the 2 Short Espressos button to accept it.
The minutes values will start flashing. Set these values in the same way as
described above ( , , and ). After accepting the time, the
next menu will be displayed.
If auto on/off is enabled, it will also be possible to set a day on which
the machine will not be turned on automatically. This option will not be
displayed if auto on/off is disabled.
To set the day off (see fig. 11), Increase/decrease the values by pressing
the 1 Short Espresso and 1 Long Espresso buttons. When
the desired value is reached, press the 2 Short Espressos button to
accept it.
i
i