34
Megacrem
Digital thermostat status
Multiboiler machines have a digital temperature control panel with independent controls for each
brewing group.
The temperature control is performed by a PID thermostat, which provides accurate and stable
temperature management for the group.
MULTIBOILER MODELS TEMPERATURE CONTROL
Turning the group boiler off/on
HEATING
ELEMENT SIGNAL
BUTTONS
CURRENT
GROUP TEMP.
During normal mode, the temperature display shows the
current temperature for the group. When the boiler’s
heating element is working and water is heating up, a
small blue dot will illuminate to indicate this function.
Note:
Adjust the group boiler’s temperature up with the
button and down with button.
i
i
Note: There are 2 types of multiboiler machines:
2 groups with 3 boilers.
3 groups with 4 boilers.
To turn the thermostat and its group boiler off, press and hold
the
button for 2 seconds. The thermostat selected will be
disconnected, “OFF” will be displayed, and the group will start to
cool down.
To connect the thermostat:
If the thermostat is “OFF”, press either the or
button. The thermostat will be turned back on and the group’s
current temperature will be displayed as the group boiler
starts to heat up.
off
To Next Page
Loading...
Need help?
General
