Express Water MODEL 6 - Product Overview and Specifications; Component Identification and Dimensions; System Settings and Filter Stages

4
PRODUCT
FUNCTION
2.3 Filter Cartridge Specication
Water Treatment Process
Municipaltapwater→TierISED+CARltercartridge→TierIIROM/ALKltercartridge→purewater
IMPORTANT: The replacement cycle of the lter cartridge will depend on local water conditions.
2.1.2 Overall Dimensions-18”Lx6.1”Wx15.8”H
2.1 Production Structure and Dimension
2.1.1 Illustration of structure / packing list
1) System
2)SED+CARFilter
3)ROM/ALKFilter
4) 1⅜”lockclip
5) 2 ¼” lock clips
6) ~3ft 1/4" tubing (white)
7) ~3ft 1/4" tubing (red)
8) ~3ft 3/8" tubing (white)
9) 3-way connector
10) Drain saddle
11) RO faucet
12) User manual
2.2 Product Settings
2
3
1
6
7
8
9
11
10
Model No.
Powersupplyspecications
Feed water pressure
Tap water temperature
Puriedwateroutputow*
Totalpuriedwatervolume**
Tap water source
Tap water quality
ROT600/ROT600ALK
100~240V50/60Hz
30-100 psi
41°F-100°F
0.42 gpm
Up to 1056 gallons (depending on actual tap water quality)
City / well water only
<1000 ppm
*Thepuriedwateroutputowisbasedon77°Fwatertemperature.
**Dependingonactualtapwaterqualityandusage,thetotalpuriedwatervolumewillvary.
MODEL 6 MANUAL
12
‘POWER’ - Power port
‘PURE’ - Pure water port
‘IN’ - Inlet water port
‘WASTE’ - Waste water port
4
5