20
English EX-61001
For the Virtual COM Utility go to:
www.exsys.ch/en or www.exsys.de/en
Search for: EX-61001
Alternatively you can scan the QR Code on the right:
© Copyright 2023 by EXSYS Vertriebs GmbH. All rights reserved
5. Device Server Configuration
The EX-61001 is delivered with the following factory settings:
Login User Name: admin
Password: admin
IP Address: DHCP
Network Operation Mode: VCOM
Serial Interface: RS232
By pressing and holding the "Reset" button for 5 seconds, the device will be reset to the factory
settings.
Configuration:
• Install the VCOM software (download, see below) as administrator (right click, "run as
administrator"). Then restart the computer.
• As soon as you have connected the server (details can be found on the next pages), you can
access the unit via the button "Open in Browser".
• If you know the IP address assigned by the DHCP server, you can also type it directly into
your browser and log into the unit.
To Next Page
Loading...
