INSTALLATION
19
4.2.2
Operating Environment
This instrument may be operated in temperatures from 32° - 104° F (0° - 40° C).
Relative humidity of 20 to 80%.
Altitude up to 6500 feet (2,000 meters).
4.3 STORAGE AND SHIPMENT
4.3.1
Environment
This instrument may be stored or shipped in environments with the following limits:
Temperature......................... -40° to 75°C
Altitude............................ 7,620 meters (25,000 feet)
The instrument should also be protected against temperature extremes which may cause
condensation within the instrument.
4.3.2
Packaging
Original Packaging: Please retain all original packaging materials that you originally
received. If you are returning your instrument to us for servicing please repackage the
instrument in its original container. Please enclose the instrument with all options,
accessories and test leads. Indicate the nature of the problem or type of service needed.
Also, please mark the container "FRAGILE" to insure proper handling. Upon receipt
your instrument will be issued an Extech service number. Please refer to this number in
all correspondence.
Other Packaging: If you do not have the original packaging materials please follow these
guidelines:
1). Wrap the instrument in a bubble pack or similar foam. Enclose the same information
as above.
2). Use a strong double-wall container that is made for shipping instrumentation. 350 lb.
test material is adequate.
3). Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all
sides of the instrument. Protect the control panel with cardboard.
4). Seal the container securely.
5). Mark the container "FRAGILE" to insure proper handling.
6). Please refer in all correspondence to your AR service number.
4.3.3
Field Installation Of Options
There are no field installable options on this instrument.
To Next Page
Loading...