Need help?Do you have a question about the Extech Instruments 380320 and is the answer not in the manual?
General| Model | 380320 |
|---|---|
| Category | Test Equipment |
| Display | LCD |
| Ripple and Noise | <1mVrms |
| Type | Power Supply |
| Current Measurement | 0 to 3A |
| Power Supply | AC 100-240V, 50/60Hz |
| Output Current | 0 to 3A adjustable |
| Line Regulation | <0.01% + 2mV |
Symbols indicating user manual reference or presence of hazardous voltages.
General safety guidelines for operation and maintenance of the meter.
Important precautions to prevent damage or injury during meter operation.
Specific warnings about potential hazards and proper handling of the meter.
Precautions to observe when setting the function switch for specific measurement positions.
Instruction to remove power and disconnect test leads if voltage is present during resistance tests.
Explanation of the LED indicating voltage presence and actions to take.
Guidance on connecting the red and black test leads to the meter's input terminals.
Steps to check the meter's battery level using the BATT.CHECK function.
Procedure to verify the integrity and functionality of the meter's test leads.
Detailed steps for performing high resistance (megohm) measurements.
Instructions for conducting low resistance measurements on the circuit.
Steps to calibrate the meter's zero point for resistance measurements.
Procedure for measuring AC voltage using the meter.
Detailed instructions for replacing the meter's AA batteries.
Information and legal requirements for the proper disposal of used batteries.
Overview of the meter's general characteristics and operating parameters.
Details on resistance measurement ranges, accuracy, and test conditions.
Technical data for AC voltage measurement capabilities.
Specifics for megohmmeter functions, including ranges, accuracy, and test current.
To Next Page