Need help?Do you have a question about the Extech Instruments 380820 and is the answer not in the manual?
General| Frequency Range | 45 to 65Hz |
|---|---|
| Cord Length | 6 ft |
| Display | LCD |
| Data Hold | Yes |
| Power Factor Range | 0 to 1 |
Essential safety measures to prevent injury and equipment damage during operation.
Explanation of safety symbols and compliance with relevant standards for safe operation.
Detailed description of front panel controls, keypad, and LCD display.
Explanation of memory functions, special keys like $, OCP, Hz, and FUNC.
Details on rear panel ports, ventilation, power input, and output.
Steps for preparing the unit and placing it on a level surface.
Diagram for basic test setup and how to select front/rear output.
Procedure to set and confirm the desired voltage output for the front panel.
Procedure to program and confirm the desired frequency output.
How to set and confirm the Over Current Protection (OCP) value.
Procedure for saving and retrieving voltage/frequency configurations from memory.
How to program and use the 'Cost of Electricity' function for KWh calculations.
How to display voltage, THD, and harmonics (n=1~50) for rear output.
Information on overheating protection and connecting the unit to a PC for data acquisition.
Detailed specifications for voltage, frequency, power, current, and power factor.
Specifications for rear panel measurements including power, voltage, current, and harmonics.
Information on input power source, fuse, operating conditions, dimensions, and weight.
To Next Page