Datalogger Mode6
2. Logger serial number and OK indicator (informs that no alarms were
triggered).
3. Factory information and date the log file was created.
4. Logger configuration other logging details.
5. Temperature Alarm report. For Alarm information see Section 7.
6. RH Alarm report. For Alarm information see Section 7.
7. y-axis Temperature and RH ranges.
8. Temperature recorded data points.
9. RH recorded data points.
10. x-axis date and time.
11. Time-stamped markers (events placed in the logging report by long press-
ing the MARK button).
12. Logged readings.
#NAS100123; r. AA/88670/88670; en-US
18
To Next Page
Loading...
