EasyManua.ls Logo

Extech Instruments 42280A - Specifications

Extech Instruments 42280A
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
9
Range* Resolution Accuracy at
77 (25)
Temperature
measurements
-22 to 158 (-30 to 70)
0.1°
± 0.9 (0.5)
RH measurements 0.1 to 99.9% 0.1%
± 3% from 10 to
90% (otherwise
±5%)
Dew Point
calculation
32 to 122 (0 to 50)
0.1°
n/a
Temperature sensor
NTC thermistor.
Relative humidity
(RH) sensor
Capacitive type.
USB Interface USB 2.0 (no driver required).
Data log sample
rate
Programmable: 30 seconds, 5, 10, 30, 60, 90, and 120 minutes.
Data log start delay Programmable: 0, 5, 10, 30, 60, 90, 120 minutes, and 24 hours.
Internal memory 24,000 temperature readings and 24,000 RH readings, maximum.
Alarm types Single event, Cumulative (average), or OFF.
Meter power
4 x AA batteries (supplied). Optional 9 V adapter.
Battery life (typical) Three (3) months with beeper disabled. Two (2) months with
beeper enabled.
Operating and stor-
age temperature
-20 to 70 (-4 to 158)*
Operating and stor-
age humidity
< 90% RH, non-condensing.
Dimensions Meter: 4.7 x 3.5 x 1.5 inches (121 x 89 x 38 mm)
Display: 2.0 x 2.5 inches (51 x 63 mm)
Weight 5.7 oz. (163 g)
*Note that the temperature sensor can measure down to -22 (–30) but the
meter should not be used below -4 (–20).
#NAS100123; r. AA/88670/88670; en-US
23

Related product manuals