8 CO210-en-EU_V1.2 8/14
Maintenance
CLEANING AND STORAGE
1. The meter should be cleaned with a damp cloth and mild detergent when necessary. Do not use
solvents or abrasives.
2. Store the meter in an area with moderate temperature and humidity.
Specifications
Function Range Resolution Accuracy
CO2 0 to 9999ppm 1ppm ±(5%rdg +50ppm)
Temperature
-10 to 60°C
14 to 140°F
0.1° ±0.6°C/0.9°F
Humidity 0.1 to 99.9% 0.1%
±3%(10 to 90%)
±5%(< 10% or > 90%)
Display LCD
Sensor Type CO2: NDIR (non-dispersive infrared) technology
Humidity: Capacitance sensor;
Temperature (air): Thermistor
Response CO2: <2min for 90% step change
Temp: <2min for 90% step change
%RH: <10min for 90% step change
Datalogging Up to 15999 points
Sample rate 1 second to 4 hours-59 minutes-59 seconds
Operating Conditions -10 to 60°C (14 to 140°F); < 90% RH non-condensing
Storage Conditions -20 to 60°C (-4 to 140°F); <99% RH non-condensing
Power Supply 5VDC (±10%), 500mA (AC adaptor supplied)
Dimensions / Weight 117x102x102mm (4.6x4x4”); 204g (7.2 oz.)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
