MA44x‐en‐GB_V1.0 8/16
17
Maintenance
WARNING: To avoid electrical shock, disconnect the meter from any circuit and turn OFF
the meter before opening the case. Do not operate with an open case.
Cleaning and Storage
Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or solvents.
If the meter is not to be used for 60 days or more, remove the batteries and store them separately.
Battery Replacement
1. Remove the Phillips head screw at the back (near center) of the meter. See accompanying
diagram.
2. Open the battery compartment.
3. Replace the three (3) 1.5V ‘AAA’ batteries observing correct polarity.
4. Re‐assemble the meter before use.
5. Safety: Please dispose of batteries responsibly; never dispose of batteries in a fire, batteries
may explode or leak; never mix battery types, install new batteries of the same type.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection sites, the retail
store where the batteries were purchased, or wherever batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end‐of‐life
devices to a designated collection point for the disposal of electrical and electronic equipment.
To Next Page
Loading...
Need help?
General
