Need help?Do you have a question about the Extech Instruments VB450 and is the answer not in the manual?
General| Type | Vibration Meter |
|---|---|
| Frequency Range | 10Hz to 1kHz |
| Data Hold | Yes |
| Min/Max | Yes |
| Average | Yes |
| Power | 9V battery |
| Accuracy (Vibration) | ±(5% + 2 digits) |
| Temperature Range | 0 to 50°C (32 to 122°F) |
| Units | m/s², °C/°F, V |
| Sensor Type | Piezoelectric accelerometer, thermistor, vane anemometer |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
The primary visual output for displaying measurement values and status.
Allows selection of measurement units (Acceleration, Velocity, Displacement).
The component that detects vibration and attaches the meter to ferrous surfaces.
Used to turn the meter on/off and freeze displayed readings.
Instructions for opening the battery compartment, installing or replacing the 9V battery, and observing polarity.
To Next Page