9
TECHNICAL FEATURES
Chapter 2
Features U.M.
Duchessa
Duchessa Steel
Comfort Maxi
Contessa
Falò 1XLP
Falò 1CP
Falò 2CP
Tosca Plus
Weight kg 150 138 132 147 302 361 361 170
Height mm 1032 1032 606 1068 1522 1522 1522 1150
Width mm 538 538 640 522 950 1806 1806 560
Depth mm 541 541 717 547 618 800 800 568
Diameter of fume discharge pipe mm 80 80 80 80 80 80 80 80
Diameter of air intake pipe mm 50 50 50 50 50 50 50 50
Max. heating volume m 200 200 205 242 204 204 204 253
Max. global thermal power kW 10.0 10.0 10.0 12.0 10.0 10.0 10.0 12.0
Max. thermal power needed kW 8.7 8.7 8.9 10.5 8.9 8.9 8.9 11.0
- air power supply kW 8.7 8.7 8.9 10.5 8.9 8.9 8.9 11.0
- water power supply kW - - - - ----
Min. thermal power needed kW 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
Min. useful thermal power kW 3.4 3.4 3.4 3.4 3.5 3.5 3.5 3.6
- air power supply kW 3.4 3.4 3.4 3.4 3.5 3.5 3.5 3.6
- water power supply kW - - - - ----
Max. fuel combustion per hour kg/h 2.0 2.0 2.0 2.5 2.0 2.0 2.0 2.5
Min. fuel consumption per hour kg/h 0.8 0.8 0.8 0.8 0.7 0.7 0.7 0.8
Tank capacity kg ~ 25 ~ 25 ~ 28 ~ 21 ~ 32 ~ 32 ~ 32 ~ 24
Recommended chimney draught Pa ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10
Chimney draught at max. useful thermal power Pa 12 12 12 12 12 12 12 12
Chimney draught at min. useful thermal power Pa 10 10 10 10 10 10 10 10
Nominal electrical power W 300 300 300 300 300 300 300 300
Appliance electric power W 300 300 300 300 300 300 300 300
Nominal voltage Vac 230 230 230 230 230 230 230 230
Nominal frequency Hz 50 50 50 50 50 50 50 50
Diameter of water intake/output pipe “ - -------
Diameter of automatic discharge pipe “ - -------
Pump head m - - - - ----
Max. working water pressure allowed bar - - - - ----
The tank capacity depends on the type of pellet used.
Tests carried out using wooden pellets as fuel, with heating power of 4.9 kW/h/kg.
The data stated above is a reference and not binding. The manufacturer reserves the right to carry out any
modi cations in order to improve the performance of the product.
The electrical power of the appliance indicates the sum of the electrical absorption of the components
present, as per standard, inside the product. The nominal power is the maximum power value that the
appliance can absorb also considering the installation of various additional devices.