Extreme Networks 7720 - Port Partitioning; QSFP28 Port Partitioning Options

Port Partitioning
On some ExtremeSwitching Universal switch models, you can congure QSFP28 ports
either as single ports or as multiple, partitioned ports. In a partitioned port, with
appropriate cabling, the original physical port can accommodate multiple data lanes
at lower bandwidths.
The following partitioning options are available:
Table 4: QSFP28 Port Partitioning
Switch model Port
bandwidth
Port partitions
7720-32C 100 Gb or 40
Gb
Ports 1-27 and 29-32 with one of the following:
• One 100 Gb port (default)
• One 40 Gb port
• Two 50 Gb ports (Switch Engine only)
• Four 25 Gb ports
• Four 10 Gb ports
• One 1 Gb port with the 10506 QSA adaptor
(both Switch Engine and Fabric Engine)
Note: Port 28 cannot be partitioned and is
40/100G capable only.
For information about conguring partitioned ports, see the SwitchEngine 32.4
Command Reference Guide .
16 Extreme 7720 Hardware Installation Guide