Need help?Do you have a question about the Extreme Networks VSP 4900 Series and is the answer not in the manual?
General| Product Series | VSP 4900 Series |
|---|---|
| VLANs Supported | 4096 |
| Humidity | 5% to 95% Non-Condensing |
| Ports | 24, 48 |
| 10 Gigabit Ethernet Ports | Up to 48 per line card |
| 40 Gigabit Ethernet Ports | Up to 12 per line card |
| Switching Capacity | 1.4 Tbps |
| Throughput | 1.4 Tbps |
| Power Supply | Dual, hot-swappable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Form Factor | 1U Rack-Mountable |
Target audience for installation guide.
Discusses document conventions and text formatting.
Lists features of the VSP4900-48P switch front and rear panels.
Details front and rear panel features of the VSP4900-12MXU-12XE switch.
Lists front and rear panel features of the VSP4900-24S switch model.
Describes front and rear panel features of the VSP4900-24XE switch model.
Details available VIM options for VSP 4900 series switches.
Details 350 W AC PSU compatibility and status LEDs.
Details 715 W AC PSU compatibility and status LEDs.
Details 1100 W AC PSU compatibility and status LEDs.
Details 2000 W AC PSU compatibility and status LEDs.
Describes the VIM5-4X module, providing four 10-GbE SFP+ ports.
Describes the VIM5-4XE module, providing four 10-GbE SFP+ ports, LRM/MACsec.
Describes the VIM5-2Y module, providing two 25-GbE SFP28 ports.
Describes the VIM5-4Y module, providing four 25-GbE SFP28 ports.
Describes the VIM5-4YE module, providing four 25-GbE SFP28 LRM/MACsec ports.
Describes the VIM5-2Q module, providing two 40-GbE QSFP ports.
Details available SSD module for VSP 4900 switches for storage.
Verifies site environmental and safety requirements for installation.
Details requirements for safe and appropriate equipment mounting racks.
Guides on selecting and managing cable requirements for network installation.
Outlines requirements and precautions for powering the hardware.
Ensures adherence to relevant industry standards for installation.
Provides critical safety precautions before installing or removing switches.
Lists necessary tools, equipment, and personnel for a successful installation.
Step-by-step guide on mounting the switch into a rack or cabinet.
Instructions for installing pluggable transceivers and cables.
Details the process of installing AC power supplies into the switch bays.
Steps to power up the switch after installation and connection.
Instructions for connecting network cables to switch ports.
How to connect a PC or terminal to the switch's console port for management.
Steps for initial login and basic configuration after powering on.
Procedure for installing VIM modules into the switch.
Procedure for installing an SSD module into the switch's rear slot.
Steps to replace 350W or 715W AC power supplies in the switch.
Steps to replace 1100W AC power supplies in the switch.
Steps to replace 2000W AC power supplies in the switch.
Procedure for replacing fan modules in the switch.
Explains the status and port LEDs on the VSP 4900 switch front panel.
Details the port LED behavior for VIM5 modules in SYS and SPD modes.
Provides physical and power specifications for VSP 4900 switches.
Details fan speed, temperature variation, and acoustic noise levels.
Lists available power supply options and compatibility for VSP 4900 switches.
Lists safety, EMC, telecom, and environmental standards applicable to the equipment.
To Next Page
