Need help?Do you have a question about the Extreme Networks ExtremeSwitching ISW Series and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Managed | Yes |
| Jumbo Frame Support | Yes |
| VLAN Support | Yes |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Number of Ports | Varies by model |
| Port Type | Ethernet |
| Power over Ethernet (PoE) | Varies by model |
| Switching Capacity | Varies by model |
| Forwarding Rate | Varies by model |
| MAC Address Table Size | Varies by model |
| Layer 3 Routing | Varies by model |
| Management | Web GUI, CLI, SNMP |
| Humidity | 5% to 95% (non-condensing) |
| Power Input | Varies by model |
| Power Supply | Varies by model |
| Redundancy | Varies by model |
| Product Series | ExtremeSwitching ISW Series |
| Storage Temperature | -40°C to 70°C |
Explains icons and formatting used in the guide for clarity.
Provides contact information and resources for technical assistance.
Lists other relevant documentation for the ISW series products.
Instructions on how to submit feedback to improve documentation.
Lists items included in the product package for verification.
Details essential safety precautions during installation and operation.
Provides detailed technical data and parameters of the switch.
Illustrates and describes the switch's front panel components and ports.
Explains the alarm relay output contacts and grounding procedures.
Describes the meaning of various LED indicators on the switch.
Step-by-step guide for mounting the switch on a DIN rail.
Instructions for attaching the switch to a wall using mounting plates.
Details on connecting network cables via RJ45 copper ports.
Explains how to connect using fiber optic SFP slots and transceivers.
Instructions for connecting the DC power supply via the terminal block.
Guide for establishing a console connection for local management.
Steps for initial connection and login to the switch's interface.
Lists recommended browser settings for web interface access.
FCC compliance statement and conditions for operation.
Canadian compliance statement for radio noise emissions.
Lists international safety standards the product complies with.
States compliance with relevant Electromagnetic Compatibility directives.
Provides definitions for key technical terms used in the document.
To Next Page