Extreme Networks VSP 4900 Series User Manual

Figure 13: VIM5-4Y Versatile Interface Module
Table 13: Port Numbers for Ports on the VIM5-4Y Module
ExtremeSwitching VSP 4900
port number for 24-port models
ExtremeSwitching VSP 4900
port number for 48-port models
25-28 49-52
VIM5-4YE Versatile Interface Module
The VIM5-4YE versatile interface module provides four 25-GbE (SFP28) LRM/MACsec
capable ports.
Note
For VSP4900-24S, only the rst 25-GbE (SFP28) port is supported.
For VSP4900-48P, VSP4900-24XE, and VSP4900-12MXU-12XE, only the rst two
25-GbE (SFP28) ports are supported.
You must set sys vim-speed to 10G or 25G for VIM5-4YE. The default is 25G.
A reboot is not necessary after setting the speed. For details about the sys
vim-speed command, see the
Command Line Interface Commands Reference
for VOSS .
For information about the supported optical modules, refer to the most recent version
of the Extreme Hardware/Software Compatibility and Recommendation Matrices .
VIM5-4YE Versatile Interface Module Expansion Modules
26 VSP 4900 Series Switches: Hardware Installation Guide

Extreme Networks VSP 4900 Series Specifications

General

Brand	Extreme Networks
Model	VSP 4900 Series
Category	Switch
Language	English