2000 W AC Power Supply Technical Specications
The 2000 W AC power supplies with front-to-back airow (part nos. XN-
ACPWR-200W-FB and XN-ACPWR-200W-F) are available for use in VSP4900-48P and
VSP4900-12MXU-12XE model switches:
Table 54: Physical Specications
Dimensions (with handle) Height: 1.57 inches (4 cm)
Width: 3.25 inches (8.25 cm)
Length: 11.51 inches (29.25 cm)
Dimensions (without handle) Height: 1.57 inches (4 cm)
Width: 3.25 inches (8.25 cm)
Length: 10.25 inches (26.05 cm)
Weight 2.95 lb (1.34 kg)
Table 55: Power Specications
Voltage input range
100-200 50 to 60Hz
Nominal input ratings 12.5 A max at 115VAC and 6A max at 230VAC at Full
770 W load
Maximum inrush current 45A at Max 264 VAC at 25C with cold start
Output 54 V, 13.2 A max, 2000 W
Power supply input socket and
cord
IEC/EN 60320-1/C16 AC input receptacles
Power cord wall plug Refer to Power Cord Requirements for AC-Powered
Switches and AC Power Supplies on page 87
Efciency Minimum efciency: 88% at maximum power output
Table 56: Environmental Specications
Operating temperature 0°C to 50°C (normal operation)
Storage temperature -40°C to 70°C
Operating humidity 93% relative humidity, non-condensing at 30C
Operational shock
Power Cord Requirements for AC-Powered Switches and AC Power
Supplies
An AC power cord is not included with the AC power supply.
Technical Specications 2000 W AC Power Supply Technical Specications
VSP 4900 Series Switches: Hardware Installation Guide 87